Window Cleaning Services

Professional Window Care Tips

Make your windows appear nice with these simple window cleaning tips.

Handling tree sap on glass

In the entire southeast Texas region, we are surrounded by huge beautiful, majestic trees. Sometimes, they are close to our homes. Most offices are located situated in parks with huge trees in the vicinity. Their shade certainly helps during the summer heat and humidity! Magnolias, Pecans, Oaks, Pines, Sweet Gums, and many more. We also appreciate the vibrant colors as the cooler days arrive in the fall.

However, these wonderful trees could release pollen, sap, and buds in spring which aren’t so great. Perhaps the most effective glass cleaner solution is this you can wet the glass with the application of a cleaning agent (which can include a mix of 50/50 distillation of white vinegar/water mixture) and then gently rub the sap and pollen. get rid of it using ultra-fine steel wool, grade No. 0000.

This window cleaning spot is done by anyone in just a few minutes. You can put your best impression to your visitors to greet visitors with sparkling clear glass, whether at home or at your commercial establishment. Both locations are important!

Security first

Always have someone nearby to ensure that you’re secure and steady even if it’s just the smallest step-stool. Also, make sure you employ a safety assistant if climbing the ladder. Better yet, get an expert window cleaning service to take care of the task because they have the knowledge and the equipment to handle those difficult-to-reach areas.

To do a ground-floor, simple-to-reach spot window cleaning, you are able to use this method with steel wool and do it in a short time.

Window sills

Start by making a list of the following items: A long soft bristle brush, or the broom, a shop vacuum, baking soda, kabob sticks, and a stiff-bristle brush. screwdrivers with flat blades spray bottles, dishwashing gloves some soft cloths, and either silicon lubricant, or wax. Dishwashing gloves are required to safeguard your hands on the sill, and window tracks, loosen the brush, and then sweep away the dry particles, using the shop vacuum to make it as clean as you can. It is essential to get the maximum amount removed in the quickest and most efficient method. This can reduce any sap pollen and dust that bonds to the cleaners are needed to get rid of the last layers of film. Additionally, use an extremely long and thin wooden Ka-bob stick for picking up the caked-in particles within the areas of window tracks where bristles of the brush do not reach. You’ll be grateful you took this not-so-detailed task.

Then, find your little baking soda box and dust. Sprinkle it over the rest of the dirty areas. Finally, pick up a bottle with our favorite natural cleaner – 50% distillation white vinegar/50 percent water in an aerosol bottle. Sprinkle the baking soda all over the sill as well as the windows tracks using the vinegar over the caked-on or perhaps “gummy” dirt. Allow it to soak for about 10 to 15 minutes. It may even bubble up slightly. Once that bubble has settled, you can apply a bristle that is stiff or perhaps an old toothbrush (if your bristles have enough length) and then loosen the entire mix and vacuums it up using the wet setting on your shop vacuum.

The third, final touches. Utilizing the cloth dampened by your vinegar cleaner, use the flat-blade screwdriver to press the cloth along the tracks that are narrow to remove the layers or films. Utilizing a second clean cloth, scrub it clean to your liking. If the window tracks are made of aluminum or vinyl, use the silicone lubricant since it’s more resistant to attracting dust (compared to oil). If your tracks are made wood and are made of wood, then wax (check at the local hardware retailer) is a reliable wood protector and lubricant. Use the window track a couple of times to ensure an even working surface.

Make sure your windows are protected Make sure they are secure and enjoy a clean view!